Off Guard™ - Case of 12 aerosols

Clear Electrical Coating

Item #111788

Off Guard™ - Case of 12 aerosols

Clear Electrical Coating

Item #111788

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Forms a tough, flexible, high dielectric coating
Insulates and protects electrical components
Will not freeze or crack in cold temperatures

Product Description

Off Guard™ forms a tough, flexible, high dielectric coating that insulates and protects electrical components. The clear, solvent-based, rubberized polymer coating is resistant to water (even if the part is submerged), oils, most chemicals and other contaminants. It also resists abrasion. Off Guard’s quick-drying formula has excellent adhesion properties and dries to a tough, flexible, rubberized coating for maximum durability. It will not freeze or crack in cold temperatures and will not sag or drip.

APPLICATIONS
Use on exposed electrical terminals and conductors, vehicle wheel wells and frames, equipment, gutters, roofing, drains and a/c condenser pans, duct work, winding coils, commutator ends, bus bars and other electrical components, or anywhere a rubberized coating is desired. The clear formula is perfect for use where appearance is a concern. Off Guard can be removed easily from most surfaces.

Directions for Use

Shake container well until steel ball rattles and continue shaking 30 seconds until ball rotates freely. Due to the rubber content, the nozzle may sputter on occasion or momentarily clog, continue to spray, clogging will clear after a few seconds. Peel away any accumulation from nozzle tip. Wires and terminals to be sealed must be clean and dry. Spray on electrical connection area. Allow to dry for 30 minutes. Apply second coat if greater thickness is required or needed. Accidental overspray can be removed with a solvent degreaser. For Food Plant Use: Avoid contamination of food during the use and storage of this product. Do not use on food contact surfaces. NOTE: Not to be sprayed on running electrical motors or live wires due to fire hazard. Disconnect all electrical equipment before using. Allow sufficient time to dry before reconnecting power.

FOR FOOD PLANT USE: Avoid contamination of food during the use and storage of this product. Do not use on food contact surfaces.