WTS® - Case of 12 aerosols - White

Ceiling Tile Spray

Item #121790-12

WTS® - Case of 12 aerosols - White

Ceiling Tile Spray

Item #121790-12

Options:

Color:

Need Assistance? Call us 1-800-321-8180

Favorite Share

First application seals the surface
Second application restores the tile
Provides perfect color match

Product Description

WTS® is specially formulated to cover water stains and soil on acoustical tile and ceilings. The first application seals and the second application restores and reconditions ceilings. It’s that fast and easy. WTS eliminates stains, dirt, yellowing and discoloring. There is no need to paint or replace ceiling tiles. Simply spray, let dry and ceilings look new again.

Painting ceiling tiles is cumbersome and expensive. WTS is extremely economical. One can will coat approximately 200 square feet which typically covers 8 tiles with three coats.

MAINTAINS ACOUSTICAL PROPERTIES
Latex or oil-based paints coat and seal off the sound-deadening chambers on acoustical tiles which destroy their acoustical and noise reducing properties. WTS gives ceilings a fresh, new look without destroying the ceiling tile’s acoustical properties.

ADDITIONAL APPLICATIONS
WTS can also be used to seal stains and graffiti preventing bleed through. Prime with WTS and simply paint over with regular paint. No bleed through, chipping, or cracking. Works on metal surfaces, cast or poured concrete, as well as ceiling tile.

Directions for Use

Protect areas not to be sprayed with masking tape or paper. Cover the area under the tile with a drop cloth. Continue to shake can occasionally while spraying. For installed ceiling tiles, hold can vertically and point top of spray button toward tile surface. Hold can 12 to 15 inches from tile. When spraying, ensure fresh air entry or wear NIOSH/MSHA respiratory protection, eye protection and protective clothing. For ceiling tiles removed from ceiling, prop tiles up on from tile. Apply first coat by using short light bursts. Apply thin coats until stains is completely covered. Allow a minute or two drying time between each coat. After spraying, turn can upside down and depress nozzle for several seconds to clean out any spray left in the nozzle.