SuperHot™ Boiler Treatment - 5 GL pail

Formulated Boiler Water Treatment

Item #121311

SuperHot™ Boiler Treatment - 5 GL pail

Formulated Boiler Water Treatment

Item #121311

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Product Description

SuperHot™ Boiler Treatment utilizes a combination of powerful scale and corrosion inhibitors in conjunction with an oxygen scavenger to provide a complete steam boiler program. This unique combination of polymer-based inhibitors prevents scale and promotes the formation of light, fluffy sludge that can be easily removed from the boiler system through regular bottom blowdown.

PREVENTATIVE PROTECTION
SuperHot Boiler Treatment prevents energy-robbing scale and reduces sludge, allowing for efficient fuel usage and lower energy costs. The oxygen scavenger in SuperHot Boiler Treatment controls damaging oxygen corrosion common in steam boiler systems. The SuperHot Boiler Treatment corrosion control program protects your boiler system investment by maximizing the life of your equipment.

CONVENIENT AND EFFICIENT
SuperHot Boiler Treatment is super concentrated, meaning you handle, store and dispose of less empties, greatly reducing freight costs.

Directions for Use

NOTE: DO NOT MIX THIS PRODUCT WITH OTHER BOILER/STEAM PRODUCTS. Use sufficient Superhot Boiler Treatment to achieve 30 - 60 ppm sulfite in the steam boiler. For most systems the required feed rate is 6 fluid ounces of product for every 1000 gal of fresh water make up added to the boiler. SuperHot™ Boiler Treatment is a combination of powerful scale control polymer agents and sulfite oxygen scavengers. Maintaining a sulfite level of 30 - 60 ppm will insure sufficient scale control ingredients. Add Superhot Boiler Treatment to the feedwater tank, deaerator storage tank, or condensate receiver tank. It is recommended that the product feed be automated using a State Industrial feed system and chemical metering pump for best results. If necessary Superhot Boiler Treatment may be
fed directly to the steam boiler. Use a State Industrial test kit to monitor sulfite levels daily. Feed product as needed to maintain a boiler sulfite level of 30 - 60 ppm. Also maintain the following control ranges:

Sulfite 30- 60 ppm Boiler TDS 3000 ppm max Hydrated alkalinity >200 ppm as OH P-alkalinity 300 - 500 Total alkalinity 700 ppm max Condensate pH 7.5 - 9.0

Blow Down: Blow down is a critical part of the scale control program for steam boiler systems. Perform bottom blow down as directed by your State Industrial sales professional to remove solids accumulations. Bottom blow down is required even if an automated surface blow down system is installed.

Condensate Treatment: Use State Superhot Steam Treatment to control corrosion in condensate return lines and receiver tanks. Follow label directions and maintain pH between 7.5 to 9.0.