State Supercool Cooling Tower Traced Inhibitor - 5 GL Drum

Cooling Tower Traced Inhibitor

Item #128749

State Supercool Cooling Tower Traced Inhibitor - 5 GL Drum

Cooling Tower Traced Inhibitor

Item #128749

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Controls scale, corrosion and sludge in evaporative cooling towers to maintain design efficiency
Tracing capability allows for accurate 24/7 program monitoring with State StaWatch™ Cooling Tower Monitor Pro
Enables water savings by allowing cooling towers to operate at optimal levels

Product Description

State® SuperCool™ Cooling Tower Traced Inhibitor is a versatile combination of scale and corrosion inhibitors. Designed to maximize cooling tower efficiency and control corrosion for metals commonly used in industrial and HVAC cooling tower systems. State SuperCool Cooling Tower Traced Inhibitor will protect steel, copper and bronze. The enhanced scale control components allow for system operation in even the hardest water conditions without acid feed or softened water pretreatment. Paired with the StaWatchTM Cooling Tower Monitor Pro, this product provides accurate and automated product monitoring. This powerful technology provides complete remote monitoring and control of industrial and HVAC cooling tower systems.

Directions for Use

State SuperCool™ Cooling Tower Traced Inhibitor is a specially developed formulation to control scale build-up and provide protection on copper, bronze, and steel parts of cooling tower systems. As a concentrate, State SuperCool Cooling Tower Traced Inhibitor should be fed at full strength directly into a rapid-flow area of the cooling tower water. For ideal product maintenance, feed State SuperCool Cooling Tower Traced Inhibitor using a metering pump and controller. For best results the State Chemical StaWatch™ cooling tower system can be used to accurately provide product control 24 hr. a day. Use the State Industrial Products Water Treatment test kit to test for active product level. Maintain product level at 200-250 ppm. (100 – 125 PTSA, or 10 – 15 ppm Sodium Molybdate). Product feed is typically 17 ounces per 1000 gallons of system bleed water. Specific product feed may vary depending on cooling system condition, demand and operating parameters. Contact your State Account Manager to determine the specific feed rates for your cooling system. Avoid contamination of food during application and storage of the product.