De-Foam® F-250 - 55 GL drum

Concentrated Foam Reducer

Item #25492

De-Foam® F-250 - 55 GL drum

Concentrated Foam Reducer

Item #25492

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Phosphate-free formula
Can be used in hot or cold systems
Effective on typical foam caused by elements such as grease, fats, detergents, oils and wastes

Product Description

The phosphate-free formula of De-Foam® F-250 is designed for use in defoaming cooling towers, carpet extraction recovery tanks, apartments or office building water tanks used for fire protection, laundries and many more applications.

VARIETY OF USES
De-Foam reduces foam in sewage systems, water pipes, aerator tanks, buildings, fire trucks and industrial systems. The formula is effective on typical foam caused by elements such as fats, detergents, oils and waste regardless of the water’s temperature.

CONVENIENT
De-Foam can be applied with sprayers, pumps, drip units, siphoning devices and metered systems. It can be used straight or in pre-diluted form. A small amount of this product can control a large amount of foam, making De-Foam economical.

Directions for Use

FOR AVERAGE FOAMING CONDITIONS Use one gallon of De-Foam® per 25,000 to 50,000 gallons of water in the system. Repeat if required.

FOR EXCESSIVE FOAMING IN MOST CONDITIONS Use one gallon of De-Foam per 5,000 to 25,000 gallons of water in the system. Repeat if required.

FOR PRE-DILUTED USAGE Mix De-Foam at a ratio of one gallon to each 20 or 30 gallons of water. Use mixed solution to obtain the same ratios as indicated in the above directions.

IMPORTANT Always stir solution to assure uniformity. Apply directly to surface.

FOR CARPET EXTRACTION EQUIPMENT Dilute 2 to 8 ounces with water depending on extent of foaming.
De-Foam can be used with a 24/7 Feed Pump to control foaming in laundry areas. Usage rates will vary. Keep from freezing. If frozen, warm to room temperature before using.