Cut-N-Cool™ - Case of 4 gallons

Cutting, Lubricating and Cooling Fluid

Item #125584

Cut-N-Cool™ - Case of 4 gallons

Cutting, Lubricating and Cooling Fluid

Item #125584

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Cost-effective bulk formula
Reduces friction
Transparent in color, so it will not stain

Product Description

Use State Cut-N-Cool™ machining coolant for individual machines or centralized coolant systems. State Cut-N-Cool™ combines with water for greater cleanliness and economy and remains stable in all dilutions. Cut-N-Cool is transparent at any dilution for better work visibility and safety.

ANTISOURING
The Cut-N-Cool antisouring system inhibits microbial growth which causes de-emulsification of oil in system and provides for longer sump life. Tramp oil may be wet vacuumed off the top of the reservoir without disturbing the system to extend sump life even longer. The semi-synthetic formula is made for all types of metal working, including tapping and threading operations. Rust preventative additives provide residual rust inhibition.

LUBRICITY
State Cut-N-Cool reduces the possibility of burning, checking, chattering and rusting. It reduces costly tool breakdown caused by inadequate lubrication and provides longer tool life. Will not gum or load grinding wheels. Formulated to reduce the hazards from oil misting.

Directions for Use

The sump and machine should be free of Cut-N-Cool™ old coolant, oils and dirt before using. Use State 999® to clean the entire system. Drain the dirty solution. DILUTION RATIOS: General Grinding: 1:25. General Milling: 1:25. Milling and Reaming: 1:20. Drilling and Tapping: 1:20. Avoid contamination of Cut-N-Cool with hydraulic and lubrication oil for longer life and maximum efficiency. May be
removed with cold water or degreasing safety solvents.