Coil Commando™ - 20 GL drum

Foaming Alkaline Coil Cleaner

Item #122393

Coil Commando™ - 20 GL drum

Foaming Alkaline Coil Cleaner

Item #122393

Options:

Need Assistance? Call us 1-800-321-8180

Favorite Share

Powerful alkaline formula removes oxidation, grease and dirt from air conditioning coils
Brightens weathered aluminum and restores it to a bright, shiny luster without streaking
Concentrated formula can be diluted for economical use

Product Description

Coil Commando™ Foaming Coil Cleaner removes oxidation from air conditioning coils. Coil Commando also keeps coils free of insulating deposits by emulsifying grease, keeping air conditioners running properly and efficiently.

FOAMING ACTION
Coil Commando’s expanding, sudsing action penetrates deep into coils, and pushes contamination outward from inside the coil. The extended contact time allows for better cleaning of the aluminum.

EASY-TO-USE
No scrubbing or pre-cleaning is necessary. Just apply Coil Commando and let it stand for three minutes, then rinse away.

SAFE AND EFFECTIVE
Coil Commando brightens weathered aluminum and removes the toughest dirt, film, diesel smoke and road scum. Aluminum is restored to a bright, shiny luster without streaking, dulling or agitation. Coil Commando’s alkaline formula eliminates the concern of working with acids.

CONCENTRATED
Coil Commando is highly-concentrated and dilutable. It improves the efficiency of air conditioners by keeping coils free of insulating deposits, thus saving energy.

Directions for Use

AIR CONDITIONER COILS
Use recommended dilution using the State Tri-Gallon Sprayer. Thoroughly wet down the coils. Rinse immediately with plenty of water. Cleaning: Use 8 oz. per gallon of water. Brightening: Use 15 oz. per gallon of water.

ALUMINUM TRAILERS AND OTHER ALUMINUM SURFACES
Apply at recommended dilution using a high-pressure washer. Allow the solution to sit for three minutes, then rinse thoroughly with plenty of water. For Badly Pitted and Oxidized Surfaces: Use 18 oz. per gallon of water. If after application the surface does not appear uniform, reapply using 6 oz. per gallon of water and rinse immediately with plenty of water. Normal Cleaning and Brightening: Use 6 oz. per gallon of water. Light-Duty Cleaning: Use 3 oz. per gallon of water. DO NOT USE ON HIGHLY POLISHED ALUMINUM.